Lab 31: Access List-II

Download

Task

Toplogy

1. Configure IP Address as per given in topology.
2. Configure Eigrp 100 over this topology. Make sure all Routers received all the routes.
3. Configure PAT on R1 and R2
4. Configure Telnet on R1 and SSH on R4.
5. Make sure R6 Access Telnet and R2 access SSH.
6. R3 not received 10.0.45.0 Route in routing table.
7. On R6, Make R5 as a best path for 10.0.13.0.
8. R5 and R4 not able to ping 100.100.0.0 network.
9. Make sure R3 only access "show ip int bri" command on R1 using Telnet.
10. R4 not able to ping R1 interfaces. But loopback address can be ping.

Solution

Download

----

@NetwaxLab